|
01. |
How many sets of injection molds did you manufacture last year? |
|
|
About 600 sets. |
|
|
|
|
02. |
Based on press size, what size of molds do you manufacture; i.e. examples, 35 ton - 350 ton, 300 ton - 650 ton, 250 tons - 1,500 tons, other? |
|
|
50tons-1200 tons. |
|
|
|
|
03. |
What is your typical mold design lead-time from receipt of a Purchase Order until Customer approval? |
|
|
We need 3-5 days to prepare preliminary design. The lead-time of getting the approval from our cclients, it varies from different clients. But we will reply to your comments about mould drawing within 24 hours. |
|
|
|
|
04. |
What is your typical mold build lead-time from design approval to Customer first shots? |
|
|
4 to 6 weeks. |
|
|
|
|
05. |
What is your typical lead-time from Customer first shots until customer sign-off on the new mold? |
|
|
Typically, it need 2-3 weeks. |
|
|
|
|
06. |
How many samples are typically required to get a Customer sign-off? Do you absorb all sample costs until the Customer sign-off for mold function and process ability? |
|
|
About 5 to 15 shots samples.Normally,we can absorb all sample costs for our clients, but our clients should pay the express charge. |
|
|
|
|
07. |
What is the typical hardness of the cavity set in the molds you manufacture? |
|
|
From 40hrc to 48hrc |
|
|
|
|
08. |
How do you certify that steel is stress relieved or the proper hardness before machining? |
|
|
By incoming inspection offered by our QC department. |
|
|
|
|
09. |
Are your cavity sets manufactured as inserts into a mold base frame or cut into the solid steel block? |
|
|
we have both, then we can make it as per our clients' requirements.
|
|
|
|
|
10. |
What are your lifter cooling best practices? |
|
|
Water line and BECU insert. |
|
|
|
|
11. |
What are your payment expectations? Do you have one set of payment terms or multiple payment terms for multiple Customers? |
|
|
Normally, by T/T, 40% as deposit down with P.O.,30% after first shot,30% before shipment.
But we can have multiple payment terms for multiple clients. |
|
|
|
|
12. |
What are your requirements for an accurate quotation? What is your standard lead-time for a new quotation? |
|
|
For mould quotation,you should offer 2D or 3D drawings to us,if need product quotation,you should also offer the part material and part weight. We normally can send you the quotations within 3 days for new enquiries. If your enquiry is urgent, we will send the quotation to you this day. |
|
|
|
|
13. |
What medium do you use to present your mold designs to your Customers? |
|
|
By email,by fax or by postal. |
|
|
|
|
14. |
What are your requirements to begin a mold design; Customer Purchase Order, Customer Purchase Order and initial payment, other? |
|
|
Customer purchase order. |
|
|
|
|
15. |
How would you describe a Preferred Customer? |
|
|
Firsty:Profession.
Second:Qucik response.
Third:Pay on time.
Fourth:Reasonalbe price. |
